Hyperprints: DTF transfers, delivered at hyperspeed.
24–48h turnaround
Build a gang sheet
Hyperprints isn't here to help you keep up. It's here to change the pace entirely.
Welcome to Output 2.0
Ultra-vivid DTF · off the sheet
Trade-only DTF wholesale for print shops and brands.
Hyperprints prints DTF and UV DTF transfers in Kansas City for the shops that decorate everything else. Upload art or a finished gang sheet, and get transfers back in 24 to 48 hours.
Built for shops that move fast. Made in the USA.
UV DTF has arrived.
Peel-and-stick transfers for the hard goods a heat press can’t reach. Build or upload UV DTF gang sheets on the same account as your DTF.
Apply: peel · place · press down · lift the film
- Tumblers
- Glassware
- Signage
- Awards
- Packaging
Transparent gang sheet pricing.
Priced by sheet length, not by how much art you fit on it. The builder shows your exact price as you build.
36″ length · DTF
$21.60
About $0.60 per inch of sheet · 24–48h turnaround
Estimated total $21.60
Need something in between? Choose a custom length in the builder. Prices shown here are estimates; the builder quotes the exact price as you build.
Open the builder| Length | DTF | UV DTF |
|---|---|---|
| 24″ | $14.40 | $30 |
| 36″ | $21.60 | $45 |
| 48″ | $28.80 | $60 |
| 60″ | $36 | $75 |
| 72″ | $43.20 | $90 |
| 96″ | $57.60 | $120 |
| 120″ | $72 | $150 |
Speed you can measure
24–48H
Turnaround on DTF and UV DTF orders, from upload to out the door. Order updates arrive by text message.
- 01
Upload.
Send your art, or a gang sheet you have already laid out.
- 02
Build.
Arrange designs edge to edge in the gang sheet builder and pay by the sheet.
- 03
Order.
Check out in your account. Order updates arrive by text message.
- 04
Done.
Transfers turn around in 24–48 hours, ready to press and peel.
See it in motion.
Hyperprints University on YouTube: how to build a gang sheet, set up files and order UV DTF.
All videos on YouTubeGang sheet builder tutorial
Hyperprints University · Ep. 1
DTF gang sheet file setup: file types, resolution and upload mistakes
Hyperprints University · Ep. 2
UV DTF explained: what it is, how to order and what it works on
Hyperprints University · Ep. 3
Pressing guide: hot peel transfers
- Temperature
- 310°F
- Press time
- 12–15 sec
- Pressure
- Med-firm
Press.
- Pre-press · 3–5 secFlatten the garment and drive out moisture.
- Press · 12–15 sec310°F at medium-firm pressure.
Peel.
- Peel · HotPeel immediately, smooth and even, in one motion.
Done.
- Re-press · 5–10 secCover with a sheet and press again to finish.
Always test first. Settings may vary by garment and heat press.
Open an account.
Hyperprints sells to the trade: the print shops and brands that decorate for a living.
- Screen printers
- Embroidery shops
- Promo distributors
- Apparel brands
- UV DTF hard-goods sellers
With an account
- DTF and UV DTF on one account
- Gang sheet builder and sheet uploads
- Order updates by text message
- 24–48h turnaround
- Ordering in English and Spanish
Questions first? Call +1 (816) 788-9448 or write to support@hyperprints.com.
Questions
Who can order from Hyperprints?
Hyperprints is a trade-only DTF wholesaler for print shops and brands. Open an account to start ordering.
How fast is the turnaround?
Orders turn around in 24 to 48 hours.
What is the difference between DTF and UV DTF?
DTF transfers are heat-pressed onto apparel and soft goods. UV DTF transfers are peel-and-stick and made for hard surfaces like tumblers, glass and signage.
Can I build my own gang sheet?
Yes. Lay out your designs in the gang sheet builder, or upload a sheet you have already built.
How do I press a DTF transfer?
Press at 310°F for 12–15 seconds with medium-firm pressure, peel hot in one smooth motion, then cover and re-press for 5–10 seconds. Always test first, since settings vary by garment and press.
How will I know where my order is?
Hyperprints sends order updates by text message, and the site is available in English and Spanish.
Notes from the press room.
GuideSuggested post
DTF vs UV DTF vs screen printing: which one fits the job
Where each method wins on run size, cost, fabric and hard goods.
How-toSuggested post
How to press DTF transfers: 310°F, 12–15 seconds, peel hot
Pre-press, press, peel and re-press, step by step.
GuideSuggested post
Gang sheet sizing: fit more designs on every sheet
Spacing, sizes and layouts that get the most out of the film.
